HVAC & Plumbing Services in Angola, IN

Conducted site evaluation for gas line extension to fireplace located on opposite side of residence from existing gas service. Assessed routing challenges due to slab foundation construction, requiring exterior gas line installation around perimeter of home. Documented existing HVAC equipment location, utility room configuration, and exterior access points to determine optimal gas line path and connection points for fireplace installation estimate.

Provided estimate for relocating tankless water heater exhaust vent termination from inside garage to exterior location. Current exhaust configuration terminates improperly within garage door area, creating potential code violation and safety hazard. Assessed existing vent piping, structural routing requirements, and exterior wall penetration specifications. Documented existing installation with photos showing tankless unit mounted on wall with current vent termination, surrounding mechanical systems including water softener tanks and filtration equipment, and available routing paths through garage ceiling structure. Proposed solution involves extending exhaust vent piping through exterior wall with proper clearances, installing approved termination cap, and ensuring compliance with manufacturer specifications and local building codes for combustion air and exhaust requirements.

Conducted comprehensive assessment of existing Bryant HVAC system in basement utility room to provide replacement estimates. Evaluated current furnace and air conditioning equipment, documenting system configuration, installation layout, ductwork connections, and clearances. Presented multiple replacement options including combined AC and furnace package as well as individual unit replacement scenarios, discussing available financing programs with homeowner. Photographed existing equipment and mechanical room setup for accurate proposal preparation.

Provided estimate for installation of customer-supplied REMC electric tank water heater in basement location. Assessed existing A.O. Smith electric water heater currently elevated on brick platform with integrated Kenetico water softener system connection. Evaluated installation requirements including electrical connections, water supply lines with flexible braided hoses, pressure tank configuration, and proper integration with existing water softener plumbing to prepare comprehensive installation quote for customer-provided unit.

Replaced existing main sump pump with Zoeller M98 model and installed Proflo battery backup system with maintenance-free battery. Removed and hauled away two old pumps from basin. Rerouted discharge piping across basement to exit at rear of home instead of original side location. Capped off two existing 1-1/2" exterior discharge lines with glued PVC caps. Installed new discharge lines with appropriate PVC piping and fittings to accommodate both primary and backup pump systems. Tested both pumps for proper operation and verified battery backup system functionality. All components installed per manufacturer specifications with proper electrical connections and check valve placement to prevent backflow.

Performed startup and commissioning on two newly installed air conditioning systems. Verified refrigerant charge at 7.66 lbs on Carrier 36SCA448N003 unit, confirmed proper system pressures and temperatures using digital manifold gauges, and documented all operational parameters within manufacturer specifications.

Responded to report of suspected water leak with sump pump and well pump cycling at irregular intervals. Conducted initial inspection of crawl space access point measuring approximately 2x3 feet at foundation level. Documented exterior foundation conditions, crawl space entry point, and surrounding soil moisture levels through photographic documentation for further assessment of potential underground leak in crawl space area.

Responded to repair damaged plumbing exhaust vent lines in attic space that were broken during recent roof installation. Accessed attic area and inspected white PVC vent piping with purple primer markings running vertically through roof structure. Assessed damage to vent stack and connections where roofing contractor had compromised the existing plumbing ventilation system. Repaired and reinstalled proper venting configuration to restore functionality of plumbing exhaust lines, ensuring all connections were secure and properly sealed. Verified vent pipes extended correctly through roof penetrations and all joints were watertight to prevent future leaks or system failures.

Performed inspection and evaluation of existing sump pump system per customer request to assess current discharge configuration and explore alternative routing options. System was found to be operational but functioning below optimal efficiency. Examined white PVC discharge piping with dual ball valves, vertical run through floor joists, and connection points in basement area. Assessed pump unit positioning on concrete floor, electrical connections, and current discharge path routing along foundation walls. Identified opportunities for system modification to improve discharge flow and overall performance. Documented existing installation with photographs showing piping layout, valve configuration, and pump placement for reference in developing recommended modifications to enhance system effectiveness.

Responded to no cooling complaint on geothermal heat pump system located in basement. Upon arrival, unit was operational but customer reported insufficient cooling capacity. Performed diagnostic evaluation of geothermal system including inspection of internal components, electrical connections, control boards, and refrigerant line set. Checked system pressures and temperatures using digital meters to assess heat exchange performance. Verified proper operation of all safety controls, relays, and wiring connections within air handler cabinet. Inspected water-side connections including flow center valves and expansion tank for proper configuration. System found to be functioning within operational parameters at time of service call.

Responded to no cooling complaint on residential air conditioning system. Upon arrival, verified system was running but producing no cool air. Connected refrigerant manifold gauges to outdoor condensing unit and performed system diagnostics, measuring refrigerant pressures and superheat levels to determine root cause of cooling failure.

Responded to emergency call for bathroom faucet that would not shut off. Upon arrival, found that the shut-off valve at the base of the sink had broken during customer's attempt to stop water flow, resulting in active water leak. Successfully shut off water supply to the affected fixture to stop the leak. Assessed the damaged shut-off valve and surrounding plumbing connections under the sink. Documented existing conditions including P-trap assembly, supply line connections, and cabinet interior for repair planning. Secured the area and ensured no further water damage would occur.

Responded to no heat call on Bryant Plus 90 gas furnace located in crawlspace. Upon arrival, found thermostat blank with no power. Traced issue to tripped circuit breaker or blown fuse at electrical panel. Reset breaker, restored power to thermostat and furnace. Verified thermostat display operational and system responding to temperature calls. Cycled furnace through complete heating cycle, confirmed ignition sequence, burner operation, and proper airflow. All safety controls functioning within normal parameters. System restored to full operation.

Performed AC start-up procedures on recently installed system using Fieldpiece SMAN digital manifold gauge to verify proper refrigerant pressures, superheat, and subcooling readings. All system parameters measured within acceptable ranges, confirming successful installation and operational readiness.

Responded to no hot water complaint following recent AC installation in tight workspace. Upon arrival, inspected gas water heater and verified gas control valve had been inadvertently switched to off position, likely bumped during AC installation work. Restored gas supply to water heater, relit pilot light, and verified proper operation and hot water delivery to fixtures throughout home.

Installed PHCC battery backup combination sump pump system in basement sump basin. The installation included mounting the primary blue pump unit in the circular concrete basin, connecting multiple discharge pipes including white PVC piping, and routing electrical cables for power supply. Configured the battery backup system to provide emergency pumping capability during power outages, ensuring continuous flood protection for the property.

# HVAC Complete System Installation Successfully completed full HVAC system replacement including installation of Carrier Comfort Series single-stage air conditioner (model 26SCA424N003), evaporator coil (model CVAVA3014XMA), and single-stage gas furnace (model 58SB0B070M14--12). Removed and recycled existing equipment from residential property. ## Equipment Installation Installed outdoor condensing unit on new 2" PVC pad against exterior wall with proper clearances maintained. Mounted new electrical disconnect and whip for condenser power supply. Positioned evaporator coil and furnace indoors, completing changeout from existing 80% efficiency system. All equipment installed per manufacturer specifications and local code requirements. ## System Connections and Testing Reconnected to existing refrigerant line set after performing thorough flush and pressure test to verify system integrity. Reconnected existing supply and return ductwork to new furnace plenum. Performed refrigerant

Responded to callback for pilot light outage on Teledyne Laars boiler, second occurrence within days raising concern for potential gas leak. Upon arrival, inspected boiler system, gas supply lines, and pilot assembly. Conducted combustion analysis and gas leak detection testing throughout system. Photographed equipment nameplate and mechanical room setup for documentation. Verified proper gas pressure, checked thermocouple operation, and tested safety controls. Relit pilot light after ensuring safe operating conditions and confirmed stable flame operation before departure.

Performed seasonal maintenance on tankless water heater system, completing thorough flushing and cleaning procedure to remove mineral buildup and ensure optimal performance. Inspected all plumbing connections, verified proper operation of unit, and confirmed system functionality. Service completed within scheduled timeframe to accommodate customer's additional HVAC appointment later in the day.