Masters Heating, Cooling, Plumbing & Electrical has over 40 years of experience providing excellent home services to Columbia City residents. With our long, humid summers and freezing winters, you need reliable heating and cooling year round. When HVAC, air quality, and plumbing issues arise, rely on our licensed technicians.
Turn to Columbia City’s top home service resource. ContactMasters Heating, Cooling, Plumbing & Electrical today.
Columbia City Heating Services
When the temperature begins to dip, it’s critical to the health of your home that you have a working heating system. Our NATE-certified heating technicians understand what it takes to keep boilers and furnaces running smoothly.
- Installation & replacement: Our heating technicians can help you pick the right unit for your home.
- Heating repair: Whether your unit is blowing cold air or making strange noises, our knowledgeable technicians will repair the issue.
- Maintenance: By investing in the maintenance of your furnace or boiler, you extend its lifespan.
- Commercial heating services: When your commercial heating unit experiences issues, we have the solution. Our expert heating technicians will get your unit running again with minimal downtime.
Top-Rated AC Services
In the heat of a Columbia City summer, working air conditioning is crucial to your well-being. Our AC technicians have decades of experience to handle ductless mini-splits and more.
- AC installation & replacement: If you’re shopping for a new air conditioning unit, our NATE-certified AC technicians have the knowledge to help you find the right unit.
- Repair: Whether your AC is blowing hot air or you’re experiencing a refrigerant leak, our licensed AC technicians can locate the problem.
- Maintenance: Through annual maintenance, you help to improve the air quality in your home.
- Commercial cooling services: Our trained AC technicians are here to help keep your business comfortable with air conditioning maintenance, repair, and installation services.
Air Quality Services in Columbia City
Indoor air is critical to your well-being. It affects everything from your mental clarity to the health of your skin. We’re passionate about providing exceptional indoor air quality systems.
- Air cleaners: These wonderful units help to remove airborne mold, pet dander, and debris to help reduce the strain on your lungs.
- Humidifiers & dehumidifiers: When indoor humidity is too high or too low, it can cause problems like mold and mildew or dry skin. By implementing systems to maintain the proper moisture level, you protect your home and body.
- UV light purifiers: UV light purifiers work by attacking the DNA of viruses and germs in the air to render them inert. By doing so, they lessen the viral load placed on your immune system.
Reliable Plumbing Services
Clean water is a cornerstone of a healthy home. From personal hygiene to cooking and cleaning, it touches every area of daily life. To keep the water in your home flowing freely, we offer plumbing services including:
- Water heater services: Whether you’re experiencing issues with your water heater like not having enough hot water, or it’s time to replace your system, our plumbing technicians are here to assist you.
- Tankless water heaters: Tankless water heaters include benefits such as endless hot water when sized correctly for your home and we can repair or install them.
- Fixture installation & repair: Though it’s tempting to reach for DIY solutions for small installations and repairs, working with a trained plumbing professional will ensure the job is done right and will last for years to come.
Schedule Services in Columbia City with Masters
Working with Masters Heating, Cooling, Plumbing & Electrical brings the benefit of over four decades of knowledge. Our licensed and insured technicians are Carrier Customer Specialists and have a knowledge of all brands of HVAC and plumbing equipment. This means we get the job done right the first time. We offer free estimates on replacement quotes with upfront pricing and financing options to ensure you’re always getting the best price possible. We’re also proud to offer discounts for our veteran, military, and senior communities.
Masters Gets There Faster. Schedule service today with Masters Heating, Cooling, Plumbing & Electrical for all your home service needs!
Recent Jobs and Reviews in Columbia City, IN
Job Locations and Reviews
Conducted comprehensive site assessment for HVAC system replacement at residential property. Documented existing equipment including outdoor condensing unit with electrical disconnect and indoor water heater/utility equipment in basement area. Evaluated current system configuration, electrical connections, and installation conditions to provide accurate replacement estimate for complete HVAC system upgrade.
Completed routine air conditioning maintenance on residential cooling system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of compressor and condenser fan, checked refrigerant lines and service valves for leaks, and measured supply air temperature at 53.2°F confirming adequate cooling performance. All components operating within normal parameters; system ready for continued service through current membership period expiring August 2026.
Responded to no cooling complaint on 10+ year old HVAC system with history of refrigerant loss from previous year. Upon arrival, found unit with blower off and conducted diagnostic evaluation of the basement-installed furnace and cooling system. Documented equipment condition with photos showing the cream-colored furnace unit with associated ductwork, electrical panel, and overall mechanical room setup to support findings and recommendations for the aging system.
Completed first annual air conditioning maintenance visit on cooling system with maintenance agreement expiring in 2027. Performed standard system inspection, measured supply air temperature at floor register reading 47.1°F and return air temperature at 63.2°F, confirming proper system operation and adequate temperature split. All system components operating within normal parameters.
Completed first annual air conditioning maintenance visit on wall-mounted HVAC unit. Performed standard cooling system diagnostics including temperature differential measurements, recording supply air temperature of 54°F and return air temperature of 68°F, confirming proper system operation and adequate cooling performance. Maintenance agreement activated and valid through May 2027, with heating maintenance visit previously scheduled separately.
Completed preventive maintenance on air conditioning system as final part of cooling service. Verified system operation and measured supply air temperature at 51.5°F at the ductwork, confirming proper cooling performance and adequate airflow through the insulated supply plenum.
Responded to no cooling complaint on unit with history of similar issue from previous service call. Upon arrival, found thermostat set to 68°F but indoor temperature at 75°F and rising with no cooling capacity. Inspected system and discovered heavily soiled air filter with significant dust and debris accumulation restricting airflow. Removed and photographed dirty filter showing clogged pleated media. Restricted airflow from dirty filter was preventing proper system operation and heat exchange. Replaced filter and restored normal system operation.
Responded to service call for HVAC system in barn not automatically switching between heating and cooling modes based on seasonal temperature changes. Diagnosed faulty zone damper actuator on ductwork preventing proper airflow control. Installed new motorized damper actuator with multi-wire connection to thermostat control system. Verified proper operation of actuator motor and confirmed thermostat communication with damper control. System now automatically engages correct heating or cooling unit based on thermostat settings and ambient temperature requirements.
Completed final prepaid cooling maintenance visit on geothermal HVAC system with GEOLINK circulation pumps. Performed standard preventive maintenance inspection and investigated customer concern regarding abnormally high electrical bills throughout winter following previous service visit. Examined circulation pump operation, electrical connections, and system controls to identify potential causes of increased energy consumption; verified proper pump cycling and checked for any components running continuously or drawing excessive amperage.
Installed a new 50-gallon Bradford White electric water heater to replace existing unit, including all necessary copper piping connections, pressure relief valve, and shut-off valves. Integrated a whole house water filtration system with blue pressure tank into the main water supply line, utilizing PVC and copper pipe connections with appropriate fittings and isolation valves. Completed all electrical connections to code and tested system for proper operation and leak-free performance.
Performed complete maintenance flush on 40-gallon Bradford White tanked gas water heater located in garage utility closet. Drained sediment buildup from tank, inspected temperature and pressure relief valve, verified proper operation of gas control valve and burner assembly, checked all copper water line connections and shutoff valves for leaks, and refilled unit to restore hot water service. All components found functioning within normal parameters upon completion of routine maintenance service.
Completed final prepaid cooling maintenance visit on split system heat pump unit. Performed comprehensive inspection of outdoor condenser unit, verified operational status of fan motor and compressor, checked refrigerant pressures and temperatures using digital clamp meter, and confirmed system readings within normal parameters at 309.2°F superheat. Unit showed good overall condition with clean coils and intact housing. All components operating properly with no deficiencies noted. System ready for continued service through contract expiration.
Replaced kitchen faucet with new brushed stainless steel pull-down model featuring gooseneck spout and spray head. Installed matching soap dispenser accessory fixture and verified proper operation of both basins' drain assemblies upon completion.
Completed comprehensive estimate for HVAC system replacement following identification of cracked heat exchanger and failing bearings in existing equipment. Assessed current Trane furnace installation and air conditioning system in utility room, documenting existing configuration including PVC condensate drainage, electrical connections, and mechanical layout. Provided detailed replacement options and specifications for new gas furnace and air conditioning system to address critical safety concerns with compromised heat exchanger and mechanical failure of bearing components.
Conducted comprehensive site assessment for complete HVAC system replacement including furnace, air conditioning unit, and water heater. Primary concern identified with existing furnace requiring immediate replacement. Evaluated outdoor cylindrical heat pump/AC unit installation against brick exterior, documented electrical conduit routing and disconnect box configuration. Inspected Bradford White 40-gallon LP gas water heater (Model M1A0T6FCX) and verified current system specifications including 36,000 BTU/hr input rating. Photographed existing equipment layout, utility access points, and electrical infrastructure to prepare detailed replacement estimate for complete system upgrade.
Completed on-site evaluation for 3.5 ton air conditioning system replacement. Assessed existing HVAC equipment including furnace unit and associated condensate drainage system, documented current installation measurements and configuration. Provided comprehensive estimate for complete air conditioner replacement including equipment specifications and installation requirements.
Completed underground ductwork installation for new residential construction. Multiple PVC duct runs were positioned and secured on prepared gravel foundation with proper support brackets and spacing in accordance with building specifications. All ductwork was properly marked, reinforced with rebar placement for concrete pour integration, and secured with fabric strapping to maintain alignment during foundation completion phase.
Picked up two spigot rebuild kits from vendor as previously ordered and completed installation of Moen Model 87069SRS faucet components in kitchen sink. Both spigot assemblies were successfully rebuilt and tested for proper operation, with no leaks detected upon completion.
Completed first prepaid cooling maintenance visit on residential HVAC system. Performed standard preventive maintenance inspection on air handler unit and associated ductwork in utility room. Removed and inspected air filter, which was found to be in clean, functional condition. Verified proper operation of heating/cooling unit, checked all warning labels and safety components for visibility and compliance. Inspected ductwork insulation for wear and integrity, noted age-related surface deterioration but system remains operational. All equipment functioning within normal parameters at time of service completion.
Conducted equipment evaluation and provided replacement estimate for 11-year-old gas furnace system in basement location. Previous service provider had diagnosed failed heat exchanger and disabled unit for safety. Assessed existing HVAC installation including furnace, ductwork, venting system with PVC exhaust pipes, refrigerant lines, and electrical connections. Documented current equipment condition and configuration through detailed photography of mechanical room setup. Presented replacement options and specifications for new gas furnace system to restore heating capability to residence.
