HVAC & Plumbing Services in Fort Wayne, IN

Installed sump pump system with white PVC discharge piping in basement utility area per customer specifications. Configured vertical discharge line from sump pit with proper fittings and cleanout access, secured horizontal pipe runs along ceiling joists using appropriate hangers and support clamps, and completed electrical connections for pump operation.

Conducted comprehensive HVAC replacement estimate for 132-year-old Queen Anne Victorian home currently served by dual-zone system with basement unit for first floor and attic unit for second and third floors. Assessed existing aged outdoor condensing unit showing significant weathering, corrosion on fan guard, and overall system degradation. Evaluated property layout, structural considerations for historic home, and discussed low-carbon environmental options including heat pump technology and high-efficiency equipment suitable for multi-story application with customer possessing engineering background.

Performed estimate for replacement of 25-year-old tall gas water heater located on main floor. Unit showing signs of excessive heat damage at bottom and sediment buildup preventing proper drainage, indicating tank deterioration and potential failure. Assessed existing installation including copper supply piping, gas connections with yellow shut-off valve, and ventilation ductwork, and provided replacement options with military discount pricing.

Installed complete sump pump system with battery backup in basement corner location. System includes new sump basin set in concrete floor, primary pump unit with backup power capability, vertical PVC discharge piping along wall framing, and dedicated electrical connections with proper outlet installation. All components tested and operational upon completion.

Conducted plumbing estimate for gas water heater venting installation to replace existing electric unit in residential mechanical room. Assessed attic space and structural framing to determine proper flue pipe routing through ceiling joists and roof penetration. Evaluated existing dual water heater configuration including gas-fired unit and insulated storage tank for geothermal system, along with water filtration equipment, to provide comprehensive venting solution and ensure code-compliant installation for converted gas appliance.

Conducted initial diagnostic assessment of existing HVAC system and returned for comprehensive evaluation to provide equipment replacement estimate. Documented current furnace installation in utility room with water treatment system and adjacent evaporator coil unit installed in wall cavity, noting refrigerant line configuration and overall system layout for replacement planning purposes.

Removed and replaced complete HVAC system including 100,000 BTU 90% single stage gas furnace and 4-ton R22 air conditioner with case coil. Installed new Carrier 59SC6A100M21 96% efficient 100,000 BTU single stage gas furnace, Carrier 4-ton case coil, and Carrier 26SCA448N003 4-ton 14 SEER single stage air conditioner utilizing R454 refrigerant. Installed Honeywell T6 programmable thermostat, 4-inch media filter cabinet with filter, and condensation pump. Flushed and reused existing refrigerant line set for outdoor unit connection. Reconnected all systems to existing ductwork, gas line, electrical power with new whip to disconnect, condensation drain, and PVC flue pipes. Performed complete system startup, tested all components for proper operation, and hauled away old equipment from premises. Installation completed in basement utility area with professional routing of all electrical conduits, gas piping, and drainage connections per manufacturer specifications.

Performed post-installation walk-through and AC system startup for HVAC unit installed previously. Verified refrigerant charge using manifold gauges, confirming proper R454B refrigerant levels and system pressures. Documented system operating parameters and ensured all components functioning correctly per manufacturer specifications.

Responded to service request for bathroom plumbing fixture replacement. Successfully replaced two bathroom faucets with chrome fixtures featuring black handles, ensuring proper installation and water flow. Replaced existing drain pipes and P-trap assembly with new white PVC components, creating proper drainage configuration. Installed new braided stainless steel supply lines connected to angle stop shutoff valves for both hot and cold water feeds. Tested all connections for leaks, verified proper water pressure and drainage flow, and confirmed all plumbing components functioning correctly upon completion.

Responded to a leak originating from an upstairs bathroom sink that had caused water damage to the ceiling below, as identified during a buyer's home inspection. Performed diagnostic inspection of the affected area, accessing the ceiling cavity to assess the extent of water infiltration and identify the source of the leak. Examined under-sink plumbing assembly including P-trap, supply lines, garbage disposal connections, and shut-off valves to determine the point of failure. Documented existing conditions through photographic evidence showing ceiling damage, structural framing exposure, and complete under-sink plumbing configuration for repair assessment and insurance documentation purposes.

Conducted site assessment of commercial kitchen basement area to evaluate existing plumbing infrastructure and provide pricing for complete kitchen renovation. Documented current conditions including aged stone foundation walls, exposed utility lines, concrete flooring with drainage systems, and horizontal PVC piping mounted along perimeter walls. Photographed basement mechanical room showing deteriorated concrete surfaces, corroded horizontal piping, and existing HVAC equipment placement to determine scope of plumbing modifications required for kitchen remodel project.

Responded to service call for two outdoor spigots experiencing leaks. Inspected first hose bib mounted on vinyl siding above brick paver patio, which exhibited leaking from the top valve assembly. Examined second outdoor spigot with brass and chrome valve components, identified leak originating from bottom connection point. Documented both fixtures with photographs showing mounting configuration, valve conditions, and leak sources for repair assessment and parts ordering.

Responded to outdoor faucet dripping issue when hose attachment was connected. Inspected hose bib mounted on brick exterior and identified leak occurring at connection point with green Y-splitter adapter. Evaluated spigot assembly, rubber washers, and threading on both the hose bib and connector to determine source of water loss. Completed necessary repairs to eliminate dripping and restore proper seal at hose connection point.

Responded to customer request for replacement estimate while technician was onsite. Evaluated existing outdoor air conditioning unit with failing compressor and indoor evaporator coil. Assessed current Trane furnace system and determined compatibility requirements for new equipment. Documented equipment conditions through photographs and provided comprehensive replacement quote for complete air conditioning system including outdoor condensing unit and indoor evaporator coil to address compressor failure.

Completed standard AC tune-up on residential outdoor condensing unit. Performed visual inspection of electrical components including dual-run capacitor and contactor assembly, verified all wire connections secure at terminals, and assessed overall system condition. Unit showing normal signs of age with dust accumulation on internal components and minor surface corrosion on capacitor housing, but all components functioning within acceptable parameters at time of service.

Completed routine monthly maintenance on Carrier outdoor condensing unit. Performed comprehensive system inspection including visual examination of unit exterior, electrical connections, and refrigerant lines. Verified proper operation of compressor and condenser fan motor. Cleaned condenser coil and checked airflow through grille. Inspected concrete pad for stability and proper drainage. Unit operating within normal parameters with no immediate service concerns identified. Discussed upcoming heating system maintenance scheduling with customer for consideration after mid-November.

Completed full HVAC system installation including Carrier 26SPA624W003 Performance Series single-stage air conditioner (2.5 ton), Carrier CVAVA3017XMA evaporator coil, and Carrier 58TP0B070V17-16 Performance Series two-stage 70,000 BTU non-condensing gas furnace in indoor utility room. Removed and recycled existing equipment, then installed new air handler unit on elevated stand with proper clearances. Reconnected system to existing refrigerant line set, performed thorough flush and pressure testing to verify system integrity. Installed new Honeywell T6 programmable thermostat and verified proper communication with HVAC equipment. Completed all electrical connections, ran and secured refrigerant lines along air handler cabinet, and connected flexible ductwork to existing duct system with proper sealing. Obtained necessary permits and ensured all installation work met local code requirements. Performed system startup procedures, verified proper airflow through supply and return ducts, a

Completed pre-installation walk-through and air conditioning system startup for installation scheduled for February 2026. Utilized Fieldpiece SMAN manifold gauge to verify refrigerant charge with R454B, confirming proper superheat and subcool readings, system pressures, and operational parameters to ensure equipment is functioning within manufacturer specifications.

Responded to no hot water complaint on residential natural gas tanked water heater. Inspected Richmond brand 40-gallon atmospheric vent water heater (model GCWU-40, manufactured October 2013) located in utility room behind dryer. Performed diagnostic assessment of unit, verified gas supply, checked pilot light operation, and inspected burner assembly and thermocouple. Evaluated flue venting system and temperature pressure relief valve for proper operation. Documented equipment condition and safety label compliance with photographs for service records.

Responded to emergency call for water heater pipe leak that customer was unable to stop. Upon arrival, assessed the leaking brass valve assembly connected to the water heater system. Removed and replaced the defective T-shaped brass valve fitting with new component, ensuring proper alignment using level tool during installation. Verified all connections were secure, tested system for leaks, and confirmed proper operation of the shut-off valve. System restored to full functionality with no active leaks detected.