Every home in Roanoke requires reliable plumbing to maintain a sanitary environment. Additionally, a good heater and AC unit are essential to ensure a comfortable climate. Whether dealing with leaky faucets, clogged toilets, or failing HVAC units, you can count on the professionals at Masters Heating, Cooling, Plumbing & Electrical for assistance.
From small repairs to major installations, we can handle it all. Our team brings years of experience to every HVAC and plumbing repair, replacement, and maintenance project. Trust us to get the job done right.
Take great care of your plumbing and HVAC systems — contact Masters Heating, Cooling, Plumbing & Electrical to schedule services.
Air Conditioning Repair & Replacement
The Roanoke area can see highs beyond 90 degrees in the summer, accompanied by plenty of humidity. When the heat hits hard in Roanoke, you’ll be glad you worked with us for AC repair and replacement.
Our team of licensed and insured technicians knows how to provide comprehensive cooling services. Rely on us when you need:
- AC repairs: We can fix any problem you’re experiencing with your system.
- AC installation: Our team can remove your old unit and install a new one in just a day.
- AC maintenance: Let our team look over every part of your system and keep it running right.
We provide service for all types of AC systems, from central AC units to ductless units to heat pumps and commercial packages. Rely on experts when you need AC repairs or replacements in Roanoke.
Heating Services in Roanoke
The winter months in Roanoke can be tough to weather if your heater doesn’t provide enough warmth. Rely on our team when you need heating services of all kinds. We provide:
- Heating repairs: Count on our team to find the cause of your system issues and perform the right repairs.
- Heating installation: We can install a new heating system that’s made to last.
- Heating maintenance: Annual maintenance can keep your heating system running well when you need it most.
From furnaces and boilers to heat pumps, geothermal systems, and commercial heaters, we work on them all! Stay warm all winter long by trusting local professionals for all your heating service needs.
Trusted Plumbing Services in Roanoke
Take good care of your entire plumbing system with help from a team that offers comprehensive plumbing services in Roanoke. Our team can get your entire system working right. Look to us for:
- Traditional and tankless water heater services
- Plumbing fixture repairs
- Sump pump services
- Water treatments
Make sure your plumbing is in top condition with help from Masters Heating, Cooling, Plumbing & Electrical.
Air Quality Services
Breathe easy every day knowing that your home’s air quality is as good as it gets. Masters Heating, Cooling, Plumbing & Electrical offers air quality services throughout Roanoke. Depend on us when you need:
Why Choose Us?
Since 1980, Masters Heating, Cooling, Plumbing & Electrical has provided upfront pricing, free estimates, special deals, and financing on a wide array of heating, cooling, and plumbing services. We’re Carrier Customer Specialists and work on all brands of HVAC systems. Count on us to get your plumbing and HVAC systems running properly.
Contact us to schedule HVAC and plumbing services in Roanoke today.
Recent Jobs and Reviews in Roanoke, IN
Job Locations and Reviews
Completed first prepaid preventive maintenance visit on geothermal cooling system. Performed comprehensive system diagnostics including electrical measurements and temperature differential readings across the unit. All operating parameters measured within manufacturer specifications, with supply air temperature differential of 5.8°F and line voltage reading of 294.7V confirmed normal for system operation.
Completed prepaid plumbing maintenance visit including tanked water heater flush service. Inspected water heater unit, verified manufacturer specifications on equipment label, and performed standard maintenance procedures. Documented equipment condition with photos for service records.
Responded to service call for non-functioning outdoor faucets where homeowner had attempted repairs with penetrating oil without success. Upon arrival, customer redirected priorities to two indoor bathroom faucets requiring attention. Inspected and serviced indoor faucet fixtures with chrome finish and porcelain cross-handles, ensuring proper operation and functionality of both units.
Completed post-installation walk-through (PIWT) on geothermal heat pump system model WGA1607BG1NAA2C1L2B11, serial number 260802730, manufactured by Goodman. Verified proper operation of unit, reviewed electrical specifications and system parameters with homeowner, and conducted PIWT on second geothermal unit installed two weeks prior.
Completed full HVAC system installation including Carrier 27SCA524A003 outdoor condensing unit and FJ5ANXB24L00 indoor air handler. The outdoor unit was positioned on a composite pad in the side yard area between the residence and privacy fence, with proper clearances maintained and electrical conduit securely mounted to exterior wall. The indoor air handler was installed in the basement utility area within wooden framing structure, with all manufacturer labels and specifications clearly visible and accessible for future service requirements.
# Cooling System Maintenance
Completed first prepaid cooling maintenance visit on Carrier HVAC system. Performed comprehensive inspection of indoor air handler unit and associated components. Verified system electrical readings using digital multimeter, recording operational voltage of 496.7V to ensure proper power supply to equipment. Inspected ductwork connections and verified proper airflow throughout the system. Examined air filtration system with replacement filter staged for installation. All cooling system components found operating within normal parameters.
# Summary
Successfully completed geothermal HVAC system installation in attic space, including Carrier air handler unit with integrated iWave air purification system, properly configured ductwork, and condensate drainage system.
# Work Performed
Installed complete geothermal heating and cooling system in attic utility space. Positioned and secured Carrier brand air handler unit on OSB platform with appropriate structural support. Integrated iWave air purification technology into the air handler to enhance indoor air quality through ionization. Connected large-diameter flexible supply ductwork with proper insulation to minimize thermal loss and ensure efficient air distribution throughout the structure.
Installed black refrigerant line set with appropriate insulation wrapping to prevent condensation and maintain system efficiency. Configured secondary equipment unit with reflective insulation barrier for temperature control and energy efficiency. Established proper condensate manag
Conducted on-site evaluation for heat pump and air handler replacement estimate. Assessed existing Bryant outdoor condensing unit located in side yard service area and dual air handling units installed in attic space. Documented current equipment configuration, installation conditions, and provided comprehensive replacement system recommendations to customer.
Responded to no heat call on 10-year-old furnace system. Upon arrival, performed diagnostic testing using clamp meter to measure electrical current and verify power supply to unit. Inspected both indoor furnace components and outdoor condensing unit for proper operation. System evaluated and measurements recorded to determine cause of heating failure and restore functionality to HVAC system.
Responded to service call for non-operational geothermal system. Performed diagnostic testing using manifold gauge set to check refrigerant pressures and system performance on the older geothermal unit. Documented system readings and conditions with photos for technical reference and further evaluation.
Responded to service call for leaking gas-fired power vent water heater located in walkout basement. Assessed existing unit with blue expansion tank, yellow flexible gas line, white PVC venting, and standard copper plumbing connections. Provided estimate for replacement of failed water heater with new gas power vent unit, including necessary materials and labor for proper installation per code requirements.
Completed scheduled preventive maintenance on cooling system as final prepaid visit. Performed standard system inspection including pressure diagnostics, with gauge readings indicating normal operating parameters near zero static pressure. Measured and recorded ambient temperature at 37.5 degrees, confirming proper system operation and performance within manufacturer specifications.
Completed comprehensive HVAC system evaluation for equipment replacement estimate under technical supervision. Assessment included inspection of existing water heater installation, mechanical room configuration, and current Honeywell thermostat system to determine replacement specifications and compatibility requirements for new HVAC equipment installation.
Completed installation of residential geothermal HVAC system in basement utility area. Installed vertical air handler unit with integrated humidifier system and connected all necessary ductwork using metal flex ducting and rigid duct runs. Mounted and wired electrical junction boxes and breaker panel to code specifications, running conduit and electrical wiring throughout the mechanical room to power all system components. Connected geothermal heat pump unit with proper refrigerant lines and manifold piping. Installed water heater/buffer tank with multiple black PEX piping connections running to floor penetrations for ground loop integration. Routed all copper plumbing lines along wall framing for hydronic distribution. Secured all flex conduit, wiring bundles, and mechanical connections according to manufacturer specifications. Verified proper clearances around all equipment for service access and code compliance. System tested and confirmed operational with all electrical connections
Provided estimate for replacement of gas-fired tank-style water heater with pilot light failure. Existing unit located in basement showed signs of age and pilot would not remain lit, indicating likely thermocouple or gas valve failure. Assessed current installation including copper supply piping, venting configuration, and gas line connections to determine scope of replacement work.
# HVAC Service Call - No Cooling Issue
Responded to a no cooling complaint on an aging air handler system over 10 years old. Upon arrival, performed comprehensive diagnostic evaluation of the unit installed in the basement mechanical room. Inspected the gray metal air handling unit with integrated control panel and associated ductwork connections.
Examined all electrical components including the white control panel housing with mounted pumps and motors. Verified proper voltage and amperage readings at the unit. Tested thermostat communication and control signals to ensure proper system operation. Inspected refrigerant line connections, including the gray insulated piping running to the unit, checking for proper insulation integrity and signs of refrigerant leakage.
Evaluated the condition of flexible metal ductwork and rigid duct connections for proper airflow. Checked condensate drainage system for blockages or improper drainage that could affect system performance. Inspected all
Completed final prepaid cooling system maintenance visit on residential air conditioning unit. Performed comprehensive seasonal inspection including electrical connection verification at contactor assembly, voltage testing with digital multimeter, and overall system operational assessment. All electrical terminals, wiring connections, and components found secure and functioning properly with no issues identified. Unit operating within normal parameters.
Completed first part of annual cooling season preventive maintenance on air conditioning system. Performed electrical diagnostics using digital multimeter to verify proper voltage and amperage across system components. Measured and documented operating temperatures with infrared thermometer to confirm unit running within manufacturer specifications.
Responded to service call for gas water heater producing unusual noise during operation. Upon arrival, inspected Bradford White 50-gallon natural gas water heater model RG1PV50S6N19 with power vent system. Evaluated the black power vent assembly and associated components mounted on top of unit. Examined PVC venting system running vertically from unit to ceiling. Documented equipment condition and installation specifications including 40,000 BTU/hr input rating and proper clearances for closet installation. Verified unit serial number and manufacturer specifications for service records.
Completed first prepaid cooling system maintenance visit on residential air conditioning unit. Performed comprehensive system diagnostics including supply air temperature measurements at register showing -70.4°F and electrical readings at outdoor condensing unit using digital multimeter. All measurements recorded and system operating within normal parameters.
